Pool Repair in Haslet, TX

When a pump, filter, heater, or leak stops a Haslet pool, that is a repair visit. Lucent Pools comes to the house, diagnoses the equipment pad, and repairs what failed before we recommend a replacement. We repair the same day or next day when parts and schedule allow. We serve homes in Sendera Ranch and across Haslet. Call 817-339-6770. Haslet is mostly in Tarrant County, with a small part in Denton County, and it borders Fort Worth.

Last updated: October 12, 2026

Call 817-339-6770

Do you repair pool equipment in Haslet?

Yes. Lucent Pools repairs pool equipment in Haslet. We repair pool equipment in Fort Worth, Frisco, and Lewisville, and we service most of the DFW Metroplex. Our standard rates are on the pool repairs page. Call 817-339-6770.

Pumps, filters, and heaters on a Haslet pad

We start at the equipment. Weak flow, a noisy bearing, or a pump that loses prime is checked at the motor, the seal, and the impeller. Cloudy water with the chemistry already in range points to the filter. We clean cartridges, DE grids, and sand beds, then inspect the tank and the valves, and we recommend replacement only when cleaning will not restore the filter. A heater that will not fire or hold temperature is checked as a system: flow, the gas or electrical supply, then the unit, including Jandy, Raypak, and Rheem heaters and heat pumps. We service and repair all pool equipment brands, including Jandy, Pentair, and Hayward. We are an Authorized Jandy ProEdge Warranty Station and can also help with Pentair and Hayward warranty claims.

Leaks and Haslet drought stages

Haslet's drought plan asks pool owners to drain and refill less at Stage 1. A later stage bans draining and filling a pool, though you can still top it off, and auto-fill valves cannot be used. A pool that keeps dropping, or an auto-fill valve that runs all the time, is easier to fix before then. We check the pad first: a pump seal, a valve, the filter tank, or a union. Lines under the yard or the shell may need a pressure test. Call 817-339-6770.

Filter repair that saves water in Haslet

Haslet's town site says a traditional filter backwash uses 180 to 250 gallons and suggests water-saving filters. A filter that needs backwashing again and again usually has a problem: torn grids, a worn cartridge, or channeled sand. We clean or repair the filter first and recommend replacement only when cleaning will not restore it. Haslet water comes from Fort Worth and two town wells, and the town's 2024 report lists hardness of 5 to 10 grains per gallon, so we also check the heater and salt cell for scale.

Timers, lights, and salt cells

A controller that skips valves or a timer that misses its schedule leaves the pool half running. We diagnose automation and controllers, pool lights, and salt systems and sanitizers on site. We repair in-ground pools and in-ground spas. We do not repair portable hot tubs.

How a Haslet visit works

Call 817-339-6770 or use the contact page, and describe what the pool is doing. Monday through Friday, 8:00 AM to 6:00 PM. Saturday closed. Sunday closed. Lucent Pools has 25+ Years in the Pool Business. Family and veteran owned. We repair the same day or next day when parts and schedule allow.

Suction-side leak on an equipment pad before the repair

Repair pricing

Call 817-339-6770 for a quote. Our standard rates are on the pool repairs page.

Service calls start at $85, plus applicable tax. See the full rate card.

Starting rates exclude tax and parts. Final pricing depends on the equipment, parts, and brand.

Frequently asked questions

What equipment do you repair for a Haslet pool?

Lucent Pools repairs pool equipment in Haslet, TX: automation and controllers, filters, pumps, heaters, heat pumps, manifolds, plumbing, valves, pool lights, salt systems, and sanitizers. Tell us the symptom and we start with the part that stopped. Call 817-339-6770.

Do you repair and replace Jandy, Pentair, and Hayward equipment?

Yes. We repair all major brands, including Jandy, Pentair, and Hayward. If a repair will do the job, we fix the equipment you have. When something needs replacing, we usually recommend Jandy. As a Jandy ProEdge builder and dealer and an Authorized Jandy ProEdge Warranty Station, we can give you a 3-year warranty on new Jandy equipment. The choice is always yours, though. If you'd rather stay with your current brand, we'll supply and install that instead.

Can I refill my pool during a Haslet drought stage?

Topping off is allowed, but a later Haslet drought stage bans draining and filling a pool, and auto-fill valves cannot be used. If your pool is losing water now, fix the leak before restrictions start. Call 817-339-6770 and tell us how fast the level drops.

What are your hours?

Monday through Friday, 8:00 AM to 6:00 PM. Saturday closed. Sunday closed. Call 817-339-6770 or use the contact page to request a visit.

How is a Haslet repair priced?