Pool and Equipment Repair in Fort Worth and DFW

We repair and replace pool equipment for Fort Worth and DFW homeowners — including automation and controllers, filters, pumps, heaters, heat pumps, manifolds, plumbing, valves, pool lights, salt systems, and sanitizers. We diagnose on site and repair the same day or next day when parts and schedule allow. Call 817-339-6770.

We service and repair all pool equipment brands, including Jandy, Pentair, and Hayward. We are an Authorized Jandy ProEdge Warranty Station and can also help with Pentair and Hayward warranty claims. 25+ Years in the Pool Business.

• Automation & controllers — timers, actuators, and control systems for all pool equipment brands.
• Pumps — filter pumps, booster pumps, pump motors, and seals.
• Filters — repair and replace; see filter cleaning below for DE, cartridge, and sand service.
• Heaters & heat pumps — diagnose and repair; details in the heater section below.
• Manifolds, plumbing & valves — including check valves and backwash valves as needed.
• Pool lights — repair or replace failed fixtures.
• Salt systems & sanitizers — salt cells and chlorinators when failing.
• Pad & suction issues — suction leaks at the pad and equipment-package work when the repair path calls for it.

Call 817-339-6770 · or contact form

Losing water wastes chemicals and can damage decks or structure if ignored. We help Fort Worth and DFW homeowners tell evaporation from a real leak, then find whether the problem is on the equipment pad or deeper in plumbing or structure. Call 817-339-6770.

Leak detection and repair pricing — Call 817-339-6770 for a current quote.

Bucket test (homeowner-safe)

1. Place a bucket of pool water on a step; mark water levels inside the bucket and on the pool.
2. Compare the drop over 1–2 days (account for rainfall and splash-out).
3. If the pool drops faster than the bucket, you likely have a leak — call us.

Equipment-pad vs plumbing / structural

Equipment pad: often visible — pump seals, valves, filter tanks, heater fittings, unions.

Plumbing / structural: underground lines, shell, skimmer, light niches, fittings — may need pressure testing, dye testing, or listening tools.

When to call

• Constant autofill or frequent top-offs
• Soggy or eroding spots near the pool
• Air in returns, a wet pad, or a sudden level drop

What we do

We diagnose the path, find the source when possible, repair fittings and pad items, or coordinate a structural/plumbing fix as appropriate. Same day or next day when parts and schedule allow for equipment-side fixes.

Call 817-339-6770 · or contact form

When the heater won’t fire, shuts off early, or won’t reach set temperature, we diagnose the whole system — flow, gas/electrical, and the heater itself — for Fort Worth and DFW pools. Call 817-339-6770.

Experience with Jandy, Raypak, and Rheem gas heaters and heat pumps. We service and repair all pool equipment brands, including Jandy, Pentair, and Hayward. We are an Authorized Jandy ProEdge Warranty Station and can also help with Pentair and Hayward warranty claims.

Heater repair / replacement quotes — Call 817-339-6770 for a current quote.

Common issues: won’t ignite; fires then shuts off; runs but won’t heat; flow / pressure faults; control board, ignitor, or flame sensor failures.

System view: heater problems are sometimes pump, filter, or valve flow issues — we diagnose the pad, not only the box.

Chemistry note: unbalanced water (especially low pH) can corrode heat exchangers — related upkeep: pool maintenance.

Repair vs replace: repair often makes sense for ignitor, sensor, board, or flow fixes when the unit is sound; replace when the heat exchanger is failed, repairs stack up, or efficiency no longer justifies repair.

Heat pumps are included in this service path.

Larger yard projects when repair isn’t enough: pool remodeling.

Call 817-339-6770 · or contact form

A dirty or damaged filter leaves water cloudy even when chemistry looks fine. We clean and service DE, cartridge, and sand filters for Fort Worth and DFW homeowners as part of equipment care. Call 817-339-6770.

Filter-clean pricing — Call 817-339-6770 for a current quote.

Cartridge

1. Shut down the pump; relieve pressure; open the filter.
2. Remove cartridge(s); rinse thoroughly; inspect for tears or permanent clogging.
3. Replace O-rings/seals if worn; reassemble; restart and check pressure.
4. Replace the cartridge when torn, crushed, or no longer cleaning up.

Sand

1. Backwash per manufacturer guidance when pressure rises.
2. Inspect the multiport / valve and laterals if pressure won’t recover or sand appears in the pool.
3. Media replacement when sand is old, channeled, or ineffective — call 817-339-6770 for a current quote.

DE (diatomaceous earth)

1. Backwash / bump per system type; recharge with the correct DE amount.
2. Inspect grids/fingers for tears (DE returning to the pool usually means grid damage).
3. Grid repair/replace or full clean as needed — call 817-339-6770 for a current quote.

When cleaning isn’t enough

Cracked tank, failed manifold, or wrong-size filter → repair/replace path (see equipment section above).

Call 817-339-6770 · contact form · maintenance customers: residential pool maintenance

Lucent Pools is insured.

25+ years repairing pool equipment.

Repair workmanship is covered for 90 days. Parts carry their manufacturer's warranty, and new Jandy equipment we install carries a 3-year warranty through our Jandy ProEdge status.

We service and repair all pool equipment brands, including Jandy, Pentair, and Hayward. We are an Authorized Jandy ProEdge Warranty Station and can also help with Pentair and Hayward warranty claims.

Heaters: experience with Jandy, Raypak, and Rheem gas heaters and heat pumps.

25+ years repairing pools in Fort Worth and DFW. Repair-first. Local. Straightforward. Diagnose on site · same day or next day when parts and schedule allow.

Based in Dallas–Fort Worth, serving Fort Worth and most of the Metroplex. Monday through Friday, 8:00 AM to 6:00 PM. Saturday closed. Sunday closed. Schedule by phone or contact form.