Pool Repair in Allen, TX

When a pump, filter, heater, or leak stops an Allen pool, that is a repair visit. Lucent Pools comes to the house, diagnoses the equipment pad, and repairs what failed before we recommend a replacement. We repair the same day or next day when parts and schedule allow. We serve homes in Twin Creeks and across Allen. Call 817-339-6770. Allen is in Collin County, with McKinney to the north and Plano to the south and west.

Last updated:

Call 817-339-6770

Do you repair pool equipment in Allen?

Yes. Lucent Pools repairs pool equipment in Allen. We repair pool equipment in Fort Worth, Frisco, Lewisville, and most of the DFW Metroplex. Our standard rates are on the pool repairs page. Call 817-339-6770.

Pumps, filters, and heaters on an Allen pad

We start at the equipment. Weak flow, a noisy bearing, or a pump that loses prime is checked at the motor, the seal, and the impeller. Cloudy water with the chemistry already in range points to the filter. We clean cartridges, DE grids, and sand beds, then inspect the tank and the valves, and we recommend replacement only when cleaning will not restore the filter. A heater that will not fire or hold temperature is checked as a system: flow, the gas or electrical supply, then the unit, including Jandy, Raypak, and Rheem heaters and heat pumps. We service and repair all pool equipment brands, including Jandy, Pentair, and Hayward. We are an Authorized Jandy ProEdge Warranty Station and can also help with Pentair and Hayward warranty claims.

Allen water and watering rules

Allen's water comes from the North Texas Municipal Water District (NTMWD). Allen's 2025 water quality report lists total hardness of 96.0 to 200 ppm for water from NTMWD's Wylie plants and 96.0 to 144 ppm from its Leonard plant. On a pool, hardness shows up as scale on tile, in the heater, and on salt cell plates, and we check for it on an Allen repair visit. From April 1 through October 31, Allen allows watering up to twice a week on assigned days, with no watering from 10 a.m. to 6 p.m. From November 1 through March 31, it's once a week on the primary day. If Allen enters Stage 3 of NTMWD's drought plan, filling, draining, and refilling pools is banned except for structure, operation, or safety, and topping off for evaporation is allowed. That holds across Allen, including Star Creek. Call 817-339-6770.

Timers, lights, and salt cells

A controller that skips valves or a timer that misses its schedule leaves the pool half running. We diagnose automation and controllers, pool lights, and salt systems and sanitizers on site. We repair in-ground pools and in-ground spas. We do not repair portable hot tubs.

How an Allen visit works

Call 817-339-6770 or use the contact page, and describe what the pool is doing. We come to homes in Watters Crossing and the rest of the city. Monday through Friday, 8:00 AM to 6:00 PM. Saturday closed. Sunday closed. Lucent Pools has 25+ Years in the Pool Business. Family and veteran owned. We repair the same day or next day when parts and schedule allow.

Pressure-side leak on an equipment pad before the repair

Repair pricing

Call 817-339-6770 for a quote. Our standard rates are on the pool repairs page.

Service calls start at $85, plus applicable tax. See the full rate card.

Starting rates exclude tax and parts. Final pricing depends on the equipment, parts, and brand.

Frequently asked questions

What equipment do you repair for an Allen pool?

Lucent Pools repairs pool equipment in Allen, TX: automation and controllers, filters, pumps, heaters, heat pumps, manifolds, plumbing, valves, pool lights, salt systems, and sanitizers. Tell us the symptom and we start with the part that stopped. Call 817-339-6770.

Do you repair and replace Jandy, Pentair, and Hayward equipment?

Yes. We repair all major brands, including Jandy, Pentair, and Hayward. If a repair will do the job, we fix the equipment you have. When something needs replacing, we usually recommend Jandy. As a Jandy ProEdge builder and dealer and an Authorized Jandy ProEdge Warranty Station, we can give you a 3-year warranty on new Jandy equipment. The choice is always yours, though. If you'd rather stay with your current brand, we'll supply and install that instead.

Does Allen's water hardness affect my pool equipment?

NTMWD, Allen's water supplier, lists total hardness of 96.0 to 200 ppm for water from its Wylie plants in its 2025 report. Hardness shows up as scale on tile, in the heater, and on salt cell plates. If a heater short-cycles or a salt cell reads low, call 817-339-6770 and we check the equipment for scale.

Can I top off my Allen pool during watering restrictions?

Allen's watering schedule covers sprinklers and irrigation. If Allen enters Stage 3 of NTMWD's drought plan, filling, draining, and refilling pools is banned except for structure, operation, or safety, and topping off for evaporation is allowed. That includes homes in The Park at Montgomery Farm. If the pool is losing water, call 817-339-6770 before restrictions start.

What are your hours?

Monday through Friday, 8:00 AM to 6:00 PM. Saturday closed. Sunday closed. Call 817-339-6770 or use the contact page to request a visit.

How is an Allen repair priced?

Call 817-339-6770 for a quote. Our standard rates are on the pool repairs page.

What is covered under the repair warranty?

Repair workmanship is covered for 90 days. Parts carry their manufacturer's warranty, and new Jandy equipment we install carries a 3-year warranty through our Jandy ProEdge status.

Related pages

Lucent Pools repairs pool equipment in Allen. Based in Dallas–Fort Worth, serving Fort Worth, Frisco, Lewisville, and most of the DFW Metroplex.

Lucent Pools is insured.